WINKEL / JD / MR Combined Bearing Cross Reference: selection, replacement and quotation support
Map WINKEL-style 4.xxx / PR4.xxx / 4.4xx designations to JD, MR, TR and 400-series purchasing references used by maintenance and OEM buyers. Use this table to start a replacement search, then confirm dimensions and execution before ordering.
Cross references and catalog data support preliminary identification. Confirm the current drawing, load capacity, tolerances and application requirements before ordering. See the industrial bearing RFQ checklist for the full data set.
How to use this interchange table
Brand and distributor numbers identify a dimensional family. They do not guarantee drop-in interchange. Always confirm d, D, H, axial-roller execution, plate or stud mounting, load and lubrication.
- Start from the full marking on the old bearing or drawing
- Match WINKEL / JD / MR / TR / 400-series references in the table
- Open the linked model page and compare the specification table
- Send photos, quantity and destination with the RFQ
Execution groups covered
The rows below cover fixed-axial standard, precision PR, eccentric-adjustable and jumbo high-load combined bearings already published in the model directory.
- Standard 4.05x fixed axial
- Precision PR4.xxx
- Eccentric 4.45x
- Jumbo / high-load adjustable
RFQ checklist for interchange
When the marking is worn or mixed across brands, include measured envelope dimensions and the mating steel profile.
- Complete model and every suffix
- Radial OD, overall height and axial-roller position
- Fixed, precision, eccentric or plate-mounted execution
- Quantity, destination and required documents
WINKEL / JD / MR interchange table
| WINKEL / primary | JD reference | MR reference | TR / 400-series | Execution |
|---|---|---|---|---|
| 4.053 | JD52.5-33 | MR0706 | TR050.0200 / 400-0053 | Standard |
| 4.054 | JD62-37.5 | MR0021 | TR060.0200 / 400-0054 | Standard |
| 4.055 | JD70.1-44 | MR0022 | TR070.0200 / 400-0055 | Standard |
| 4.056 | JD77.7-48 | MR0023 | TR080.0200 / 400-0056 | Standard |
| 4.058 | JD88.4-57 | MR0025 | TR090.0200 / 400-0058 | Standard |
| 4.059 | JD101.2-46 | — | 400-0059 | Standard |
| 4.061 | JD107.7-69 | MR0027 | 400-0061 | Standard |
| 4.062 | JD123-72.3 | MR0029 | 400-0062 | Standard |
| 4.063 | JD149-78.5 | MR0010 | TR010 / 400-0063 | Standard |
| PR4.054 | JD64.8-37.5 | MR001M | TR001M / DR400-0054 | Precision |
| PR4.055 | JD73.8-44 | MR002M | TR002M / DR400-0055 | Precision |
| PR4.056 | JD81.8-48 | — | DR400-0056 | Precision |
| PR4.058 | — | — | DR400-0058 | Precision |
| PR4.059 | — | — | DR400-0059 | Precision |
| PR4.061 | — | — | DR400-0061 | Precision |
| PR4.062 | — | — | DR400-0062 | Precision |
| PR4.063 | — | — | DR400-0063 | Precision |
| 4.090 | JD190-84.5-KP | — | 400-0090 | Jumbo adjustable |
| 4.091 | JD220-94.5-KPD | MR0013 | 400-0091 | Jumbo adjustable |
| 4.092 | JD250-102-KPD | MR0014 | 400-0092 | Jumbo adjustable |
| 4.093 | JD280-119.5-KP | MR0015A | 400-0093 | Jumbo adjustable |
| 2.063 | — | MR0120 | TR120 | Radial precision |
| 2.0363 | — | — | TR111 | Radial precision |
| 4.057 | JD77.7-40 | — | 400-0057 | Standard |
| 4.060 | JD107.7-53 | — | 400-0060 | Standard |
| 4.085 | JD180-95.7-KP | — | — | Jumbo adjustable |
| 4.064 | JD149-86 | MR191 | 400-0064 | Standard |
| 4.089 | JD180-75 | — | 400-0089 | Standard |
| 4.454 | — | — | 400-0454 | Eccentric adjustable |
| 4.455 | — | — | 400-0455 | Eccentric adjustable |
| 4.456 | — | — | 400-0456 | Eccentric adjustable |
| 4.457 | — | — | 400-0457 | Eccentric adjustable |
| 4.458 | — | — | 400-0458 | Eccentric adjustable |
| 4.459 | — | — | 400-0459 | Eccentric adjustable |
| 4.460 | — | — | 400-0460 | Eccentric adjustable |
| 4.461 | — | — | 400-0461 | Eccentric adjustable |
| 4.462 | — | — | 400-0462 | Eccentric adjustable |
| 4.463 | — | — | 400-0463 | Eccentric adjustable |
| 4.094 | — | — | 400-0094 | Jumbo adjustable |
| 4.095 | — | — | 400-0095 | Jumbo adjustable |
| 4.096 | — | — | 400-0096 | Jumbo adjustable |
| 4.039 | JD185-95 | — | — | Jumbo adjustable |
References are identification aids only. Confirm dimensions, axial execution, mounting and duty before treating any row as interchangeable. Click a row to open the factory model page.
Information required for winkel / jd / mr combined bearing cross reference quotation
- 1 Identify — model, suffix and machine reference
- 2 Measure — envelope and mounting dimensions
- 3 Describe duty — load, speed, shock and environment
- 4 Approve — proposed drawing and documents
Related products and buyer resources
More buyer support guides
WINKEL / JD / MR Combined Bearing Cross Reference FAQ
How do I specify winkel jd mr cross reference?
Send the complete model, all suffixes, quantity, delivery country and a controlled drawing when available. Also state load, speed, environment and mounting details.
Can you verify an equivalent winkel jd mr cross reference?
Yes. Cross-reference numbers start the review, but interchangeability is confirmed from dimensions, internal design, adjustment, load capacity, lubrication and operating conditions.
What information is required for a quotation?
Provide the old marking, photos or drawing, critical dimensions, application, quantity and destination. Required inspection documents should be stated before quotation.
Technical note: This guide supports preliminary sourcing. Confirm the controlled drawing, tolerances, load capacity and application requirements before ordering. Return to the solutions library, browse bearing products or review quality and inspection scope.